Effect of Bentonite Addition on Fabrication of Reticulated Porous SiC Ceramics for Liquid Metal Infiltration


SiC with different particles and a clay mineral bentonite (montmorillonite) were mixed in water to prepare ceramic slurry. The slurry was then infiltrated high porous polyurethane sponge. Excess slurry was squeezed out to adjust ceramic rate in the infiltrated body. The pore walls were coated with ceramic mix after the infiltrated body was dried. The polyurethane containing SiC particles and bentonite was fired in a box furnace to burn out the polyurethane from the body at 500 °C for 30 min. The remaining porous ceramic bodies were sintered at elevated temperatures to give strength. SiC particles with bentonite surface coating took polyurethane pore forms after firing the sponge. Bentonite was both used as binder for ceramic slurry at room temperatures and the sintering additives at elevated temperatures. Therefore, increasing bentonite addition gives higher strength to the resulting ceramic performs.
Keywords: Porosity, Composite, Ceramic foam, Infiltration, SiC particles
Cite this article: U.Soy, A.Demir, F.Caliskan, “Effect of Bentonite Addition on Fabrication of Reticulated Porous SiC Ceramics for Liquid Metal Infiltration”, Ceramics International 37-1, 15-19 pp., 2011, DOI: https://doi.org/10.1016/j.ceramint.2010.07.028
[Abstract]  [PDF Download]  [DOI Link]



Makale Başlığı Effect of Bentonite Addition on Fabrication of Reticulated Porous SiC Ceramics for Liquid Metal Infiltration
Yazarlar Soy, U., Demir, A., Caliskan, F.
Yazar Statüsü Başlıca Yazar
Dergi Adı Ceramics International
Cilt(Sayı)/Sayfa 37(1), pp. 15-19
Yıl 2011
DOI Numarası 10.1016/j.ceramint.2010.07.028
DOI Link https://doi.org/10.1016/j.ceramint.2010.07.028
İndeksleme Science Citation Index Expanded
İndeks Linki https://mjl.clarivate.com:/search-results?issn=0272-8842&hide_exact_match_fl=true&utm_source=mjl&utm_medium=share-by-link&utm_campaign=search-results-share-this-journal
ISSN / eISSN 0272-8842 / 1873-3956
Atıf Sayısı 27



No Atıf Yapan Yayının Bilgileri Atıf Yılı Kaynak
1 Soy, U., Ficici, F., Demir, A., Evaluation of the Taguchi method for wear behavior of Al/SiC/B4C composites, Journal of Composite Materials 46(7), pp. 851-859, 2012. 2012 Scopus,
Web of Science
2 Zhang, Z.-J., Yu, X.-D., Wang, Y.-W., Li, K., Luan, Z.-Q., Preparation of reaction-formed porous SiC ceramics, Hangkong Cailiao Xuebao/Journal of Aeronautical Materials 32(4), pp. 57-61, 2012. 2012 Scopus
3 Hu, L., Zhang, Y., Zhang, S., Zhou, Y., A novel decompress-freezing process for ultra-high porosity ZrO 2 ceramics, Materials Letters 82, pp. 152-155, 2012. 2012 Scopus,
Web of Science
4 Eom, J.-H., Kim, Y.-W., Raju, S., Processing and properties of macroporous silicon carbide ceramics: A review, Journal of Asian Ceramic Societies 1(3), pp. 220-242, 2013. 2013 Scopus
5 Zhang, L., Liu, X., Li, X., (…), Tian, C., Li, H., A novel SiC foam valve tray for distillation columns, Chinese Journal of Chemical Engineering 21(8), pp. 821-826, 2013. 2013 Scopus,
Web of Science
6 Lim, K.-Y., Kim, Y.-W., Song, I.-H., Low-temperature processing of porous SiC ceramics, Journal of Materials Science 48(5), pp. 1973-1979, 2013. 2013 Scopus,
Web of Science
7 Lim, K.-Y., Kim, Y.-W., Song, I.-H., Porous sodium borate-bonded SiC ceramics, Ceramics International 39(6), pp. 6827-6834, 2013. 2013 Scopus,
Web of Science
8 Yue, H., Wang, X., Tian, J., Fabrication of Si3N4 reticulated porous ceramics reinforced by needle-like β-Si3N4, Ceramics International 40(6), pp. 8525-8532, 2014. 2014 Scopus,
Web of Science
9 Tucker, M.C., Tu, J., Ceramic coatings and glass additives for improved SiC-based filters for molten iron filtration, International Journal of Applied Ceramic Technology 11(1), pp. 118-124, 2014. 2014 Scopus,
Web of Science
10 Smorygo, O., Marukovich, A., Mikutski, V., Sadykov, V., Evaluation of SiC-porcelain ceramics as the material for monolithic catalyst supports, Journal of Advanced Ceramics 3(3), pp. 230-239, 2014. 2014 Scopus,
Web of Science
11 Moradi, M. R.; Moloodi, A.; Habibolahzadeh, A., Fabrication of Nano-composite Al-B4C Foam via Powder Metallurgy-Space Holder Technique, 5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15 Location: Tehran, IRAN Date: NOV 11-12, Book Series: Procedia Materials Science, Volume: 11, Pages: 553-559, 2015. 2015 Web of Science
12 Li, H., Fu, L., Li, X., Gao, X., Mechanism and analytical models for the gas distribution on the SiC foam monolithic tray, AIChE Journal 61(12), pp. 4509-4516, 2015. 2015 Scopus,
Web of Science
13 Li, H., Fu, L., Cong, S., Gao, X., Li, X.-G., Hydrodynamic performance of new SiC foam valve tray, Huaxue Gongcheng/Chemical Engineering (China) 43(11), pp. 20-24, 2015. 2015 Scopus
14 Resmi, V.G., Sree Manu, K.M., Lakshmi, V., (…), Pavithran, C., Pai, B.C., Processing of silica bonded porous SiC preform for metallic composites, Journal of Porous Materials 22(6), pp. 1445-1454, 2015. 2015 Scopus,
Web of Science
15 Jamaludin, A.R., Kasim, S.R., Abdullah, M.Z., Ahmad, Z.A., Physical, mechanical, and thermal properties improvement of porous alumina substrate through dip-coating and re-sintering procedures, Ceramics International 42(6), pp. 7717-7729, 2016. 2016 Scopus,
Web of Science
16 Yuan, B., Li, H.-X., Wang, G., (…), Liu, Y.-S., Shen, Z.-J., Preparation and properties of porous silicon carbide based ceramic filter, Journal of Alloys and Compounds 684, pp. 613-615, 2016. 2016 Scopus,
Web of Science
17 Majeed, S.M., Al-Hussien, H.J.A., Preparation silicon carbide pours and studies their characterization, Journal of Engineering and Applied Sciences 12(Specialissue6), pp. 7919-7924, 2017. 2017 Scopus
18 Terzić, A., Pezo, L., Andrić, L., Pavlović, V.B., Mitić, V.V., Optimization of bentonite clay mechano-chemical activation using artificial neural network modeling, Ceramics International 43(2), pp. 2549-2562, 2017. 2017 Scopus,
Web of Science
19 Wu, J., Chen, A., Liu, M., (…), Zhu, X., Wang, L., Preparation of Ceramic Materials Used for Selective Laser Sintering and Related Forming Methods, Materials China 36(7-8), pp. 575-582, 2017. 2017 Scopus
20 Wu, Z., Sun, L., Wang, J., Progresses on the optimal processing and properties of highly porous rare earth silicate thermal insulators, Journal of the Korean Ceramic Society 55(6), pp. 527-555, 2018. 2018 Scopus,
Web of Science
21 Saba, G., Hesaraki, S., Hajisafari, M., Utlization of rheological parameters for the prediction of β-TCP suspension suitability to fabricate bone tissue engineering scaffold through foam replication method, Journal of the Australian Ceramic Society 54(4), pp. 587-599, 2018. 2018 Scopus,
Web of Science
22 Chang, Q., Chen, L., Zhang, J., Li, Y., Liang, X., Study on the technology and performance of 3D-reticulated porous SiC/Fe composite material, Composite Interfaces 26(3), pp. 247-262, 2019. 2019 Scopus,
Web of Science
23 Li, Y., Yang, X., Liu, D., (…), Zhang, D., Wu, Z., Permeability of the porous Al2O3 ceramic with bimodal pore size distribution, Ceramics International 45(5), pp. 5952-5957, 2019. 2019 Scopus,
Web of Science
24 Jia, W., Wang, Y., Hei, D., Chen, R., Li, S., Effect of the amount of andalusite addition on the properties of lightweight porous reticulated materials, Construction and Building Materials 213, pp. 257-264, 2019. 2019 Scopus,
Web of Science
25 Ha, J.-H., Lee, S., Choi, J.R., (…), Song, I.-H., Chung, T.-J., A cobalt-coated reticulated porous alumina for radar-absorption applications, Journal of the Australian Ceramic Society 55(3), pp. 883-891, 2019. 2019 Scopus,
Web of Science
26 Huseynov, A., Israfilov, A., Mammadova, S., (…), Goryunkov, A., Guliyev, A., Fabrication and characterization of MWCNT/natural Azerbaijani bentonite electroconductive ceramic composites, Journal of Composite Materials 53(26-27), pp. 3909-3923, 2019. 2019 Scopus,
Web of Science
27 Kim, Y.-H., Kim, Y.-W., Seo, W.-S., Processing and properties of silica-bonded porous nano-SiC ceramics with extremely low thermal conductivity, Journal of the European Ceramic Society 40(7), pp. 2623-2633, 2020. 2020 Scopus,
Web of Science